PCB1 Pressure Die Casting Brass
Composition (maximum % unless otherwise listed)
| Cu | 57.0 - 60.0 |
| Sn | 0.5 |
| Zn | Remainder |
| Pb | 0.5 - 2.5 |
| Fe | 0.3 |
| Al | 0.5 |
| T-I | 0.5 |
T-I Total Impurities
Elements marked with * are specified impurities
Typical Physical Properties
| Tensile Strength (MPa) | 280-370 |
| Elongation (% min) | 25-40 |
| 0.2% Proof Stress (MPa) | 90-120 |
| Hardness (HB) | 60-70 |